Investigation of the machinability of SiC reinforced MMC materials produced by molten metal stirring and conventional casting technique in die-sinking electrical discharge machine
Yazarlar (3)
Dr. Öğr. Üyesi Abdullah UĞUR Karabük Üniversitesi, Türkiye
Doç. Dr. Engin Nas Düzce Üniversitesi, Türkiye
Prof. Dr. Hasan GÖKKAYA Karabük Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | International Journal of Mechanical Sciences (Q1) | ||
| Dergi ISSN | 0020-7403 Dergi Bilgileri (2020) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2020 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-11-2020 |
| Cilt / Sayı / Sayfa | 186 / 1 / 105875– | DOI | 10.1016/j.ijmecsci.2020.105875 |
| Makale Linki | https://linkinghub.elsevier.com/retrieve/pii/S0020740320307530 | ||
| UAK Araştırma Alanları |
Kompozit Malzemeler
Üretim Teknolojileri
Malzeme Tasarım ve Davranışları
|
||
| Özet |
| In this study, MMC materials were produced by stir casting method using AA7075 alloy matrix and silicon carbide (SiC) as reinforcement elements in order to investigate the effect of die-sinking electric discharge machining (EDM) process parameters for various weight percentage reinforcement (10% 14% and 18%) used MMC. EDM with three different pulse-on time (Time on) (25, 50 &75 µs) and discharge current value (2, 4 & 6 Amperes) and at constant dwell time (20 µs) and depth of cut (0.5 mm). After machining process, the effects of process parameters on processing time, average surface roughness, hole diameter and the weight loss were investigated. As a result of the study, highest values, the lowest values of processing time, hole diameter and average surface roughness were obtained for various weight percentage reinforcement MMC respectively. Ideal MMC, discharge current value and time-on duration … |
| Anahtar Kelimeler |
| ANOVA | Electrical Discharge Machine | Machinability | Metal Matrix Composites | Taguchi |
Science Direct
Investigation of the machinability of SiC reinforced MMC materials produced by molten metal stirring and conventional casting technique in die-sinking electrical discharge machine
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 30 |
| Scopus | 34 |
| Google Scholar | 42 |