Wear behaviour of sintered steels obtained using powder metallurgy method
Yazarlar (4)
Prof. Dr. Mehmet Akif ERDEN Karabük Üniversitesi, Türkiye
Prof. Dr. Süleyman GÜNDÜZ Karabük Üniversitesi, Türkiye
H. Karabulut
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
M. Türkmen
Kocaeli Üniversitesi, Türkiye
Kocaeli Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Mechanika | ||
| Dergi ISSN | 1392-1207 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 09-2017 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 07-09-2017 |
| Cilt / Sayı / Sayfa | 23 / 4 / 574–580 | DOI | 10.5755/j01.mech.23.4.18982 |
| Makale Linki | http://mechanika.ktu.lt/index.php/Mech/article/view/18982 | ||
| UAK Araştırma Alanları |
Toz Metalurjisi
|
||
| Özet |
| In this work, the hardness and abrasive-wear behaviour of powder metallurgy (PM) plain carbon steel and microalloyed steels with different amount of niobium or aluminium content (0.1-02 wt.-%) were investigated. It was found that steels microalloyed by niobium and aluminium have high hardness and wear resistance compared with the niobium and aluminium free steel. Wear behavior of these steels depends on the PM processing parameters and wear conditions. Worn surface pattern revealed the wear mechanism is ploughing. The surface exhibited extensive grooving occured as a result of ploughing by the harder SiC paper. DOI: http://dx.doi.org/10.5755/j01.mech.23.4.18982 |
| Anahtar Kelimeler |
| Hardness | Sliding wear | Steel | Surface topog-raphy |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 6 |
| Scopus | 9 |
| Google Scholar | 18 |