An experimental investigation on the failure loads of the mono and bi-adhesive joints
Yazarlar (2)
Dr. Öğr. Üyesi Özkan ÖZ
Karabük Üniversitesi, Türkiye
Yıldız Teknik Üniversitesi, Türkiye
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | Journal of Adhesion Science and Technology |
| Dergi ISSN | 0169-4243 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q4 |
| Makale Dili | İngilizce |
| Basım Tarihi | 07-2017 |
| Cilt No | 31 |
| Sayfalar | 2251 / 2270 |
| DOI Numarası | 10.1080/01694243.2016.1264661 |
| Makale Linki | https://doi.org/10.1080/01694243.2016.1264661 |
| Özet |
| Bi-adhesive (or mixed-adhesive) joint is an alternative stress-reduction technique for adhesively bonded lap joints. In this work, an experimental study was performed to assess the effect of bi-adhesive bondline on the failure load of mono-adhesive and bi-adhesive single-lap joints. The first step in the experimental study related to mono-adhesive joint, the overlap length was checked using the Global yielding criteria. For the selected overlap length, failure loads of AV138, Araldite 2015 and DP-8005 mono-adhesive joints were determined. It was seen that the highest failure load occurred in the Araldite 2015 mono-adhesive joint. Secondly, the bi-adhesive joints were considered as two different adhesive combinations (AV138 + 2015, AV138 + DP-8005). An interesting result was obtained that the considered bi-adhesive joints with two different adhesive combinations (AV138 + 2015, AV138 + DP-8005) give joint … |
| Anahtar Kelimeler |