Resistance spot weldability of dissimilar materials (AISI 316L DIN EN 10130-99 steels)
Yazarlar (2)
Prof. Dr. Ramazan KAÇAR Karabük Üniversitesi, Türkiye
Hasanbaşoğlu Ahmet
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | MATERIALS & DESIGN (Q2) | ||
| Dergi ISSN | 0261-3069 Dergi Bilgileri (2007) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2007 |
| Cilt / Sayı / Sayfa | 28 / 6 / 1794–1800 | DOI | 10.1016/j.matdes.2006.05.013 |
| Makale Linki | http://dx.doi.org/10.1016/j.matdes.2006.05.013 | ||
| UAK Araştırma Alanları |
Kaynak Teknolojileri
|
||
| Özet |
| The resistance spot weld of dissimilar materials is generally more challenging than that of similar materials due to differences in the physical, chemical and mechanical properties of the base metals. The influence of the primary welding parameters affecting the heat input such as; peak current on the morphology, microhardness, and tensile shear load bearing capacity of dissimilar welds between AISI 316L austenitic stainless steel and DIN EN 10130-99 (7114 grade) interstitial free steel has been investigated in this study. Although, an acceptable joint strength was obtained at 7kA peak weld current, the optimum welding parameters producing maximum joint strength were established at a peak weld current of 9kA, where the electrode force and weld time are kept constant at 6bars and 17cycles, respectively. The primary cause of weakening of the weldment is identified as the excessive grain growing region of heat … |
| Anahtar Kelimeler |
| resistance spot weld | dissimilar materials |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 52 |
| Google Scholar | 107 |