Wear Behaviour of Forging Steels with Different Microstructure during Dry Sliding
Yazarlar (3)
Soykan Hüseyin
Prof. Dr. Süleyman GÜNDÜZ Karabük Üniversitesi, Türkiye
Prof. Dr. Ramazan KAÇAR Karabük Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | TRIBOLOGY INTERNATIONAL (Q1) | ||
| Dergi ISSN | 0301-679X Dergi Bilgileri (2008) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 05-2008 |
| Cilt / Sayı / Sayfa | 41 / 5 / 348–355 | DOI | 10.1016/j.triboint.2007.09.002 |
| UAK Araştırma Alanları |
Kaynak Teknolojileri
|
||
| Özet |
| Sliding wear behaviour of two types medium carbon microalloyed steels containing various microstructures was investigated on a 320 mesh SiC paper at a sliding speed of 0.33m/s with a load of 6N and sliding duration of 4min under dry sliding conditions (the sliding distance, 80m). The experimental results showed that the different microstructures cause a great influence on the wear resistance performance of the steels. Water quenched samples with martensite structure have the highest hardness and wear resistance performance. That is because, water cooled samples contained higher amount of carbon in the solid solution. On the other hand, air or sand cooling from forging temperature results in a decrement of hardness and wear resistance in steel-1 and steel-2. However, air cooled samples showed slightly higher wear resistance than sand cooled samples due to finer grain sizes and the larger pearlite and … |
| Anahtar Kelimeler |
| microalloyed steel | sliding wear | quench |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 32 |
| Google Scholar | 46 |