Effects of hot rolling on microstructures, wear and corrosion resistance of Mo-Ni-W p/m alloyed steels
Yazarlar (6)
R. H.R. Elkilani Karabük Üniversitesi, Türkiye
Doç. Dr. Harun ÇUĞ Karabük Üniversitesi, Türkiye
Prof. Dr. Mehmet Akif ERDEN Karabük Üniversitesi, Türkiye
H. Abushrenta
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
O. Albahlol
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
B. Cicek
Hitit University, Türkiye
Hitit University, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Journal of Mining and Metallurgy Section B Metallurgy (Q3) | ||
| Dergi ISSN | 1450-5339 Dergi Bilgileri (2024) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2024 |
| Cilt / Sayı / Sayfa | 60 / 3 / 367–380 | DOI | 10.2298/JMMB240404030E |
| Makale Linki | https://doi.org/10.2298/jmmb240404030e | ||
| UAK Araştırma Alanları |
Toz Metalurjisi
Metalik Malzemeler
Biyomalzemeler
|
||
| Özet |
| This study analyzes how hot rolling changes the Fe-0.55 C-3Mo-10Ni-0.5 W alloy steel's microstructure, tensile strength, wear, and corrosion behaviors. Metal powders were pressed at 750 MPa pressure, and the cold-pressed samples were sintered at 5 C/min up to 1400 C for two hours in a mixed-gas environment of 90% nitrogen and 10% hydrogen. Following that, the generated steels underwent hot rolling at 40% and 80% deformation rates. The microstructures demonstrate that MoC (N), WC (N), and MoWC (N) were created and that the steels had finer microstructures and better mechanical characteristics as the deformation rate increased. As the degree of distortion increased, the wear reduced. Furthermore, the hot rolling method improved corrosion resistance, as shown by the Tafel curve analysis. The greatest factor supporting corrosion resistance was the increase in density value throughout the rolling … |
| Anahtar Kelimeler |
| Alloy steels | Characterization | Corrosion | Habanje | Hot rolling | Karakterizacija | Korozija | Legirani čelici | Metalurgija praha | Powder metallurgy | Toplo valjanje | Wear |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 3 |
| Scopus | 3 |
| Google Scholar | 3 |