Mechanical and Wear Properties of High Rate NiAl Particle-Reinforced Al Composites Produced by Pressure Infiltration Method
Yazarlar (3)
Doç. Dr. Hüseyin DEMİRTAŞ Karabük Üniversitesi, Türkiye
Ramazan Yıldız
Doç. Dr. Engin ÇEVİK Karabük Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | INTERNATIONAL JOURNAL OF METALCASTING (Q1) | ||
| Dergi ISSN | 1939-5981 Dergi Bilgileri (2021) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 10-2021 |
| Kabul Tarihi | 10-12-2020 | Yayınlanma Tarihi | 13-01-2021 |
| Cilt / Sayı / Sayfa | 15 / 4 / 1340–1347 | DOI | 10.1007/s40962-020-00564-6 |
| Makale Linki | http://dx.doi.org/10.1007/s40962-020-00564-6 | ||
| UAK Araştırma Alanları |
Alaşım Geliştirme
|
||
| Özet |
| In this study, Al matrix composites reinforced by the high amount of NiAl (40%) were produced by the pressure infiltration method. Commercially AA1050 (99.59 %) was used as matrix material and NiAl (at. 1:1) particles were used as reinforcement. Also, a small amount of Mo (wt. 2%) was added into NiAl for a better matrix–particle interface and to increase the mechanical properties. The proportion of particles was kept constant, and their sizes were changed from 45 to 125 µm. The microstructures were examined by SEM, and formed phases were determined by EDS and XRD analysis. Mechanical properties and wear behavior were determined by compression, hardness, and abrasion tests. As a result of these tests, it was determined that composites were produced successfully. It was determined that compressive strength increased with decreasing particle size. And also, small particle size composites showed … |
| Anahtar Kelimeler |
| aluminum matrix composites | pressure infiltration | wear |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 12 |
| Google Scholar | 11 |